In hot climates, a lot of that heat enters buildings through the roof. Thermopore (EPS) insulation sheets are one of the most cost-effective ways to keep rooms cooler, reduce the load on fans and air conditioners, and save on electricity bills.

How thermopore insulation helps
EPS sheets are full of tiny pockets of trapped air. This structure slows the flow of heat through the roof or wall, so less heat gets in during summer and less warmth escapes in winter. The sheets are also light, easy to cut and resistant to moisture.
Where to use thermopore sheets
- Under the roof, below or above the slab, before plastering or tiling.
- Inside walls and partitions for heat and sound insulation.
- In cold rooms, poultry sheds and storage rooms.
- Under false ceilings in shops, offices and factories.
Simple installation tips
- Measure the area first. A standard sheet is 8 ft × 4 ft, so divide your area by 32 sq ft to estimate how many sheets you need.
- Cut sheets with a sharp knife or a hot-wire cutter for clean edges.
- Place sheets tightly side by side to avoid gaps that let heat through.
- Cover the sheets with a protective layer (plaster, mud or cement screed) on roofs exposed to sunlight.
- For the best results, ask your builder or contractor about the right thickness for your building.
Order insulation sheets
Our thermopore insulation sheets (8 ft × 4 ft) are available for homes, builders and contractors. For large projects or custom thickness, contact us.
